Light screw elevators KANON and KRTEK

The screw elevators are intended for carrying of corn, pulse, feeding mixtures and other loose materials. You can carry the granulated substances with particles at most to 10 mm too.
The construction is very flexible, it is easy to put from the 7 m elevator a 3 or 5 m, or 9 or 11 m too.
The screws are connected with bolts, the tubes with sleeve-couplings - see the picture. The elevators are working in every disposition from horizontal to vertical.
The transport output under 500 disposition by corn is 8 000 to 11 000 kg/h for the type with Ø 100. The output depends on the disposition of the elevator and the loose weight of the kernels. The total weight of the 7 m elevator type KANON Ø100 with the 104 kg, of the type KRTEK with Ø 100 with the electric motor is 92 kg. The outer mean of the tube is 102 mm. The electrical installation except of the electromotor is not the part of the supply.

The produced basic types of KANON
and KRTEK ø 100:
The produced basic types of KANON
and KRTEK ø 150:
3 m elevator 3 m elevator
5 m elevator 5 m elevator
7 m elevator 7 m elevator
9 m elevator  
11 m elevator  
2 m extender 2 m extender


Is the customer hereafter going to protract the elevators, he has to count with greater power of the electric motor. In the order the customer has to mention the power required.

Advised power requirements of the electromotor for the ø 100: Advised power requirements of the electromotor for the ø 100:
for 5 m and 7 m 2,2 kW for 5 and 7 m 4 kW
for 9 m and 11 m 3 kW for 9 m 5,5 kW
for 3 m 1,5 kW for 3 m 3 kW

There are three-phase electric motors with 1 450 turns / min. used.

 Lehký šnekový dopravník  V délkách 3m, 5m, 7m, 9m a 11m KANON ø 100 	   KRTEK ø 100 KANON ø 150 	   KRTEK ø 150

 

 

English

There are currently 0 users online.